德国原装进口贺利氏古莎·泰克诺维Technovit®印模材料Heraeus Kulzer Technovit 3040
Technovit 3040 印模材料（impression material）
间接表面测试用辅助材料。
Technovit 3040 是以甲基丙烯酸甲酯为基质的粉液二组分树脂。Technovit 3040 被用来制作用于表面检测和测量的高精度印模。下列情形经常用到：样品太大或太重（不能在实验室中进行检测）、待测的样品不能被损坏、检测的部位接触不到、用来测量磨损度等等。Technovit 3040 印模材料，主要间接测量原始样品和原型。
Technovit 3040 能制作用于间接表面测试的印模，从而对表面状态进行记录和存档；翻制硅橡胶或石膏负模；使用双模程序复制正模 (Technovit 3040 能与Provil Novo 硅橡胶完美地匹配) 。
特点：
• 印模精度为 1μm
• 形态保持稳定
• 调和比可作调节
• 印模可被用于粗糙度测量分析，亦可用于非接触测量
Technovit® 3040 64708805、64708806、66022678
Technovit® 3040 is a quickly hardening 2-component plastic with a methyl meth acrylate base (MMA).
It is used to block or fasten embedded plastic specimens with the Histobloc or for socket embedding.
The chemical composition allows for a stable, permanent bond with the hardened block Technovit® 7100, Technovit®
8100 or Technovit® 9100.
Histobloc® – support elements 64712817、64708995
The Histobloc supports are adjustable to Histoforms S + Q or for Histoform N.
Blocking
Once Technovit® 7100, Technovit® 8100 or Technovit® 9100 has hardened, the Histobloc support element is placed in the
opening in the Teflon embedding form Histoform S/Q or Histoform N intended for this purpose (Image 1).
If Technovit® 8100 was used for embedding, the cover film must be removed from the specimen before the Histobloc®
support element is put into place. For Histoform N, the aluminium lid is removed and the PE film is removed.
Mix Technovit® 3040 until it is as viscous as possible (mixing ratio 2-3 volumetric parts of powder to 1 volumetric share of liquid).
Pour the mixed material into the opening in the Histobloc®. (Image 2)
Technovit hardens and the Histobloc tightly bonds to the specimen in 5-10 minutes, depending on the room temperature.
The specimen can now be removed from the form and is ready to be cut (Image 3).
Through blocking with the very hard Technovit® 3040, the elastic Technovit® 7100 or Technovit® 8100 is stabilised in such
a way that even the thinnest sections are possible.
64708805 Technovit® 3040 yellow Combipack, 1 x 100g / 1 x 80 ml
64708806 Technovit® 3040 yellow powder, 1000g
66022678 Technovit® 3040 universal liquid, 500 ml
64712817 Technovit® Histobloc® for Histoform N, 50 units
64708995 Technovit® Histobloc® for Histoform S & Q, 100 units
66021102 Technovit® Mixing bowl
64701106 Technovit® Spatula
64701107 Technovit® Scoop
Heraeus Kulzer GmbH(Germany) |
